Van Raam produces uniquely special needs bicycles and specializes in tricycles, transport bikes, scooterbikes, wheelchair bikes, tandem bikes, double rider bikes, and low step trough bikes (also known as comfortbikes). Each model is also available as an electric bike (Pedelec).
Learn more about all the possibilities and features of our 23 bikes. View photos and videos, read customer experiences and be inspired by the many possibilities that Van Raam bikes offer you.
Van Raam is a Dutch producer of unique custom bikes. Want to know more about our company or bikes? Read more here.
Here you can search specifically on frame- or articlenumber.
As a manufacturer, Van Raam has dealers in more than 20 countries, who sell Van Raam's adapted bikes. Furthermore, they also deliver them take care of the service and arrange the warranty. Our adapted bikes can be bought worldwide in America, Australia, Israel, Iceland, Norway, Spain, Italy and other countries. Find your nearest Van Raam dealer and ask for a test ride. Learn all about the different Van Raam dealers and see where you can find a Van Raam dealer near you.
If you have any questions, you can always contact your dealer or contact Van Raam.
As a dealer it is important to be able to read and connect a bike properly in order to be able to adjust the bike to the customer's individual needs and thus provide the best possible service.
Take a look at the Van Raam service video below and see how you as a dealer can connect and read out a Van Raam bicycle correctly.
In the following you can read step by step what you can see in the video above and learn how to connect the bike to the right way.
Connect your silent parameter cable to the display cable. To do this, first unscrew the display cable from the display. You do not have the Silent Parameter Cable? Then you, as a dealer, can order it from Van Raam with article number 103-5111.
Go to the pedal support page on the Van Raam website. Here you scroll to the bottom of the page until you reach the "Download Software" section.
Then download the "Van Raam Dealer Tool" program by clicking on the underlined link.
Open the dealer tool after it has been downloaded.
Log in to the Dealer Tool with your Dealer Username and Dealer Password. You need a dealer account to use the Van Raam dealer tool. Don't you have a dealer account yet? Then register on the Van Raam portal.
Once you have logged in, the bike will automatically connect to the system. If this is not the case, repeat the first step.
You are now successfully connected to the Van Raam bicycle. You can now view all the bike data.
From time to time it happens that customers need different settings in the pedal support, depending on the disability and needs. Do you want to customize recipes in the dealer tool? To change and duplicate recipes, your bike must be connected to the Van Raam software. Learn how you can duplicate and customize bicycle recipes, programs, in the article and video: "Adapting and duplicating recipes as a Van Raam dealer“
When a new motor or controller is installed on a Van Raam bicycle it must first be installed and tested. As the service service of a dealer is very important to ensure the mobility of the customer, Van Raam gives in this video and article a detailed instruction how to do this exactly and thus provide the best performance of the system for the customer. So in the article "Van Raam bike install and test new components" and accompanying video you will learn how you, as a dealer, can read and test new components.
In this article "Connect your adapted bike to the Van Raam e-bike app" and video you will learn how you as a Van Raam bike owner and also as a dealer, this can be relevant for service services, can connect an electric Van Raam bike to the E-Bike App.
Do you have questions or need more information? Then you are welcome to contact us, we are happy to help you Call us on +31 (0)315 - 25 73 70 or send an e-mail to Info@vanraam.com - Let us help you!