attaching bicycle cover on the van raam easy rider and fun2go

News

Attaching a bicycle cover to the Van Raam Easy Rider and Fun2Go

Bikes \ Options
Van Raam
attaching bicycle cover on the van raam easy rider and fun2go

You of course want to maintain your bike as well as possible. In doing so, it is good to protect your bike from weather conditions. It is best to store your bike indoors. But when this is not possible, a bike cover is a solution. Van Raam offers bike covers for the Easy Rider tricycle and the Fun2Go side-by-side tandem.

Video: Attaching bicycle cover to the Easy Rider

bicycle cover van raam on easy rider tricycle

Attaching the bike cover to the Easy Rider step by step

Important! Make sure your bike is dry before placing the bike cover over the Easy Rider.

Step 1. Put your bike on the parking brake to prevent it from rolling away.

Step 2. Put the bike cover over the bike. The front can be recognised by 2 orange stripes.

bike cover van raam front wheel easy rider tricycle

Step 3. Pull the cover over the handlebars and seat at the sides. Insert any mirrors into the mirror pockets. After this, pull the front of the cover over the front wheel of the bike as well. Make sure it is pulled tight at the front.

van raam bicycle cover easy rider rear wheel

Step 4. Continue pulling the bicycle cover over the handlebars, seat, luggage platform and lastly over the rear wheels of the bike. Make sure the bike cover is also covering the pedals.

bike cover van raam storm strap easy rider

Step 5. Fasten the storm strap under the bicycle.

Step 6. Check that the cover is tight at the top of the bike so that no water can accumulate in it.

Video: Attaching bicycle cover to the Fun2Go

van raam bicycle cover fun2go front wheel

Attaching the bicycle cover to the Fun2Go step by step

Important! Make sure your bike is dry before placing the bike cover over the Fun2Go.

Step 1. Put the bike on the parking brake so it stays put.

Step 2. Place the full bike cover on the front of the bike and pull the front over the front wheel of the bike. The front can be recognised by the two orange stripes.

mirror pocket bike cover van raam

Step 3. (If applicable) Pull the cover over the mirror(s) and put them in the mirror pocket(s) provided for that purpose.

bicycle cover van raam on fun2go side by side tandem

Step 4. Continue pulling the bicycle cover over the handlebars, seat, luggage platform and lastly over the rear wheels of the bike. Make sure the bike cover is also covering the pedals.

bike cover van raam rear wheel fun2go side by side tandem

Step 5. Pull the cover, side by side, over both seats and rear wheels.

Step 6. Make sure the cover is tight at the top of the bike to prevent water from accumulating.

ventilation hatch and opening for additional lock bike cover van raam

Ventilation hatches and opening for additional lock on the bicycle cover

On the front and back of the bike covers are ventilation hatches. You open these by standing up the piece of fabric with Velcro.
There are also two orange strips on the front of the bike cover. These are openings through which an extra chain lock can be attached.

Cleaning bike cover

You can clean the bike cover when it has become dirty. You do this with a wet cloth and optionally mild cleaning products.

Do you have any questions?

We are happy to assist you! Please check our contact page or contact us directly using the options below.